Hi all i am new to the forum and have very little experience with 2 stroke outboard. I have a 2004 Yamaha 50 hp 2 stroke outboard with no spark. I replaced the charge coil still no spark i did an ohm check on the trigger wires the white and red/white and black/ white and green they were all 215 with in spec then i did a DVA connected and disconnected and all had no to ,02 volts and i know the should have connected min 3v and disconnected min4v. Also the brown and blue stator wires should have 145v connected and 125 disconnected i got 0.
Does any one have any ideas i am racking my brains out trying to fix this, I'm doing all of this without a manual.
Thank You
Does any one have any ideas i am racking my brains out trying to fix this, I'm doing all of this without a manual.
Thank You
Last edited: