[email protected]
New member
Hello, I’m hopping to get some help
Motor is 2002 Yamaha 225hp ox66
I just bought the motor and having issues with the tilt and trim
I tested the relay by removing the green wire and giving it power and motor went down, did the same for blue and motor went up, figured faulty relay, replaced the relay, no go, no tilt from the motor or controls
I tested the motor tilt switch and works fine
So I disconnected everything , 4 wires coming from the pump, only way to get the motor to raise or lower is by connecting the black and say green wires to positive and blue wire to negative , motor goes up and down, any video I watched you should just connect green to power and it would go down, but the only way it works is to connect the green to the black wire in the harness
I’m trying to put the switch in directly to atleast be able to use the boat on the weekend but nothing I’m doing seems to work
Motor is 2002 Yamaha 225hp ox66
I just bought the motor and having issues with the tilt and trim
I tested the relay by removing the green wire and giving it power and motor went down, did the same for blue and motor went up, figured faulty relay, replaced the relay, no go, no tilt from the motor or controls
I tested the motor tilt switch and works fine
So I disconnected everything , 4 wires coming from the pump, only way to get the motor to raise or lower is by connecting the black and say green wires to positive and blue wire to negative , motor goes up and down, any video I watched you should just connect green to power and it would go down, but the only way it works is to connect the green to the black wire in the harness
I’m trying to put the switch in directly to atleast be able to use the boat on the weekend but nothing I’m doing seems to work