I ordered a new OEM direct replacement for my throttle actuator but the wiring harness plug and wire colors are different so we cannot re-pin without the threat of doing it wrong and frying the ECU.
OEM part has been verified by Honda. Problem is Honda used a short term manufacturer for the unit originally installed on my boat. Now it needs to be replaced but the long running parts manufacturer has a different plug and color scheme.
Had anyone encountered this problem or have access to official wiring diagrams so we can re-pin with confidence? Have spent 3-weeks trying to work through Honda without any significant help.
OEM part has been verified by Honda. Problem is Honda used a short term manufacturer for the unit originally installed on my boat. Now it needs to be replaced but the long running parts manufacturer has a different plug and color scheme.
Had anyone encountered this problem or have access to official wiring diagrams so we can re-pin with confidence? Have spent 3-weeks trying to work through Honda without any significant help.