Logo

Dt 150 oil issues

I have an 86 dt 150. I have had problems with the oil injection system since day one. Just wondering if it is possible for me to bypass the oil tank and pump and just premix my gas. If so, what all is required to bypass the oil flow sensor and keep if from going into limp mode
 
Yes you can premix your fuel. You may have 2 sensors, an oil flow sensor and a oil level sensor. To my understanding either sensor will put you in limp mode. As far as I know you just run a jumper wire between the two sensor wires BUT I’M NOT SURE so I would suggest you look for confirmation before you start running jumpers.
 
Back
Top