Logo
Click for Crusader parts and manuals!
Results 1 to 4 of 4

Thread: rear seal

  1. #1
    Join Date
    Jun 2007
    Location
    mississauga , ontario, canada
    Posts
    86

    Default rear seal

    Rear oil seal installation on 71C Dry or Wet?

  2. #2
    Join Date
    Jun 2007
    Location
    mississauga , ontario, canada
    Posts
    86

    Default Re: rear seal

    Quote Originally Posted by luhrs_40 View Post
    Rear oil seal installation on 71C Dry or Wet?
    Should i install dry or soaked in oil before install

  3. #3
    Join Date
    Sep 2008
    Location
    Maryland - USA
    Posts
    9,042

    Default Re: rear seal

    if you have the 'newer' version (no seal holder), it goes into the reduction housing dry (or with a thin strip of threadlocker around the outer case of the seal....i usually put a thin smear of quicksilver 101 on the sealing surface before installing the coupler...

  4. #4
    Join Date
    Jun 2007
    Location
    mississauga , ontario, canada
    Posts
    86

    Default Re: rear seal

    Quote Originally Posted by makomark View Post
    if you have the 'newer' version (no seal holder), it goes into the reduction housing dry (or with a thin strip of threadlocker around the outer case of the seal....i usually put a thin smear of quicksilver 101 on the sealing surface before installing the coupler...
    Thank you

Similar Threads

  1. 302 Rear main oil seal
    By Ray Inman in forum OMC Sterndrive and Inboard Forum
    Replies: 2
    Last Post: 07-31-2012, 09:00 AM
  2. 318 Rear Main Seal
    By topfuel83 in forum Chrysler Inboard and Sterndrive Forum
    Replies: 4
    Last Post: 05-19-2010, 08:29 AM
  3. 272 Rear Main Seal
    By dave_kapica in forum Ford Interceptor Marine Engine Forum
    Replies: 2
    Last Post: 01-06-2010, 04:21 PM
  4. 43 2pc Rear main seal
    By zebedee in forum OMC Sterndrive and Inboard Archive
    Replies: 2
    Last Post: 02-10-2009, 09:36 PM
  5. 4108 rear oil seal
    By ronniestjohn in forum Perkins
    Replies: 1
    Last Post: 06-14-2008, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •