Logo
Click for Volvo Penta manuals!
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2021
    Location
    Mississippi Gulf Coast
    Posts
    2

    Default How to locate top dead center on TAMD41A

    I must have run into an older version of the TAMD41A and I don't know how to locate top dead center without pulling an injector. The bell housing does not have the hole to use the locater pin tool. I must be overlooking something but dang if I know what it is. No mention of it in the shop manual either. Any help would be most appreciated.

  2. #2
    Join Date
    Nov 2021
    Location
    Mississippi Gulf Coast
    Posts
    2

    Default Re: How to locate top dead center on TAMD41A

    Quote Originally Posted by Captain Todd View Post
    I must have run into an older version of the TAMD41A and I don't know how to locate top dead center without pulling an injector. The bell housing does not have the hole to use the locater pin tool. I must be overlooking something but dang if I know what it is. No mention of it in the shop manual either. Any help would be most appreciated.
    Just for future reference, I found it back in the archives. The 41 Series have the service port on the starboard front of the bell housing up at the top. KAMD42's all the way to the 300 have the service port on the port side above the flywheel. Hope this helps someone.

Similar Threads

  1. Top dead center procedure.
    By Bama91 in forum Johnson Evinrude Outboard Forum
    Replies: 10
    Last Post: 12-22-2016, 09:09 PM
  2. Top dead center
    By bob_in_tennessee in forum Mercury Mariner Outboard Archive
    Replies: 3
    Last Post: 11-15-2008, 12:46 PM
  3. Top Dead Center
    By kevgrn114 in forum Mercruiser Sterndrive Archive
    Replies: 10
    Last Post: 07-22-2008, 11:53 AM
  4. Finding top dead center
    By mrpops in forum Crusader Marine Archive
    Replies: 18
    Last Post: 03-17-2008, 12:58 PM
  5. Finding Top Dead Center
    By ntfd321 in forum Mercruiser Sterndrive Archive
    Replies: 1
    Last Post: 04-03-2006, 10:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •