Logo

1989 OMC 115 trim issue

toqwik

Member
Hey all. So my boat has sat for a few months. Now my trim does not want to come up. Fluid is fine, pump runs, just no movement. Any snake oil treatments or attempted fixes before I replace the entire setup? Thanks in advance for your reply.
 
Yes it’s tight. I even tried putting my weight on the motor while pressing g the switch and nothing. 1 time it moved and that was it
 
Uh, they didn't make a 115 in 89. As for being hard to swap the trim units, it's not a big deal. I've done them on my older 115, and a few times on my newer 200 and 225's.
 
Assumed mine was an 89 since the boat and motor are both OMC and the boat is an 89. Model number is t visible on my tag.
 
Is it a saltwater boat? Got a photo of it? I have some here. Not sure of interchange....I sell em on eBay. If not me, then Tim's Outboard in Hackensack MN. 2186822331.
 
Back
Top