CascadeJonathan
New member
I need to replace the fuel hoses that run between the pump and the fuel filter, and fuel filter to front due to cracks (2005 motor). Some questions I have:
1.) Can I get away without Suzuki parts. Most of the fuel lines aren't too bendy. Would these be 3/8 fuel line? They measure 11mm externally.
2.) If I did use Suzuki parts could I re-use the protectors (18498-99E11) they're like $10/each x 4.
3.) Or should I use an aftermarket hose protector? I believe the purpose is mainly to be a heat shield, so something like this: https://www.amazon.com/gp/product/B07RLS2G77
4.) I do have some rusty hose clamps below, but they're not leaking, so I was thinking about not messing with them right now.
1.) Can I get away without Suzuki parts. Most of the fuel lines aren't too bendy. Would these be 3/8 fuel line? They measure 11mm externally.
2.) If I did use Suzuki parts could I re-use the protectors (18498-99E11) they're like $10/each x 4.
3.) Or should I use an aftermarket hose protector? I believe the purpose is mainly to be a heat shield, so something like this: https://www.amazon.com/gp/product/B07RLS2G77
4.) I do have some rusty hose clamps below, but they're not leaking, so I was thinking about not messing with them right now.