Looks like older gauge on a 2001 jp115. I can't find any wiring diagrams that are even close. Working until I unknowingly disconnected some wiring at the gauge. What is not connected is one of two purple wires. The one purple is spliced to the 12v source.
I have another short piece of purple spliced to the 12v source and no longer connected on the other end. I also have a purple coming from the stern that has a ring connector not attached to anything. The gauge has power but doesn't respond to changing the trim. The white ( control ) wire was never disconnect. I wrapped the loose purple wires together with no change in function. This was the only option available.. I uploaded a drawing of the wiring but can't seem to attach it to this post. Don't know how much help it would be. I believe I have described it. Any help.would be appreciated. Thanks. Oldranger.
I have another short piece of purple spliced to the 12v source and no longer connected on the other end. I also have a purple coming from the stern that has a ring connector not attached to anything. The gauge has power but doesn't respond to changing the trim. The white ( control ) wire was never disconnect. I wrapped the loose purple wires together with no change in function. This was the only option available.. I uploaded a drawing of the wiring but can't seem to attach it to this post. Don't know how much help it would be. I believe I have described it. Any help.would be appreciated. Thanks. Oldranger.