Logo
FULL SITE MENU

Oil resivor not pumping oil

A

andy_from_ar

Contributing Member
My 130 H.P. V4 is not pumping oil from resivor to the tank under the cowling . Tried the switch nope. the alarm still works. Looking for a reset button or a way to check the pump ? WAS working fine last fall.
 
andy_from_ar said:
My 130 H.P. V4 is not pumping oil from resivor to the tank under the cowling . Tried the switch nope. the alarm still works. Looking for a reset button or a way to check the pump ? WAS working fine last fall.
Click to expand...

OK looked at it somemore the pump on the resivor was hot to the touch . Unpluged it and took the plate off the pump seemed locked up freed it up and got it to spin pluged it up and it spins. going to replace filter and try it again
 
With the main tank oil below the bottom level line, turn key to ON position. The oil pump should turn on...Put the palm of ur hand on the pump and you’ll feel if it’s on. If pump is not on then it could be bad pump or continuity issue in oil harness. If pump is on but not transferring oil, check main tank oil level sensor and/or oil harness continuity.
 
Back
Top