Blacktimes
Regular Contributor
Hi everyone,
Tilt has gone bust on my port engine. Does not work either from throttle of engine mounted switch. I can hear the relay click, checked the fuse ok. Of course it could be the relay or wiring but I´m guessing that it is the tilt motor. By manually opening the relief valve and changing the engine tilt, I can get it to work intermittently for a short while. Now it´s inoperative at the tilted up/moored position, which is fine. Question is, is it a straight forward replacement? Four bolts, oring, drive adapter and connector? I will obviously secure the engine before removing but just want to check if it is a straight forward job.
Thank you.
Tilt has gone bust on my port engine. Does not work either from throttle of engine mounted switch. I can hear the relay click, checked the fuse ok. Of course it could be the relay or wiring but I´m guessing that it is the tilt motor. By manually opening the relief valve and changing the engine tilt, I can get it to work intermittently for a short while. Now it´s inoperative at the tilted up/moored position, which is fine. Question is, is it a straight forward replacement? Four bolts, oring, drive adapter and connector? I will obviously secure the engine before removing but just want to check if it is a straight forward job.
Thank you.