Logo
FULL SITE MENU

New Crusader Owner. 454, need to install carb, and exhaust. Helo

J

Jessetopp

New member
We recently purchased a new boat. Twin 454s. One engine is installer 1000 hours and runs great. The port engine was removed, complete rebuild and now needs the carb installed, exhaust manifold and then tuned.

Can anyone send ANY sorry of information tips or resources if you've done this before please. It's all mounted and aligned just needs the final bolt one out on.

Any and all advice welcome
 
A new boat doesn't have 1000 hours on it ha ha ha!

Without knowing which year, here's the Crusader manual for the engines through 1992. The engines didn't change much after that until the Fuel Injected ones showed up, so 99 percent of what's in the manual here is pertinent. Happy wrenching...
https://www.silvertonclub.com/wp-content/uploads/2015/12/Crusader-Engines-Service-Manual.pdf

From Crusader:
https://www.crusaderengines.com/classic#owners
https://www.crusaderengines.com/wp-content/uploads/2014/01/L510001-09.pdf

PS, final alignment should be done when boat is in the water if it isn't now.
 
Last edited:
Back
Top