Fishmaster23
Regular Contributor
I don't know if it was cause the boat wasn't all the way in the water or what, but I couldn't quite pinpoint where it was coming from. I backed it off the trailer and once it was in the water it sounded okay. I wanted to say it was coming from the pds bearing area. I took it out for about an out and it ran fine with no issues, I opened the hatch a couple times on the water and she purred like a kitten. This is a brand new drop in 5.7 mpi engine from Michigan motors. What do you guys think? The pds bearings were replaced too although they never bothered to use the correct open bearings. Are they going bad already? The engine only has like 43hrs on it and has a dp-a drive.