Hello Every one
as you can see from the info below: i have 2 motors 327 hp F series and one does not have holes in the head to attach the raw water pump
So i need to change the head so i cn attach the raw water pump
Port side engine
The casting number on both heads are 3884520
These do not have holes for attaching raw water
That casting number gives me the following info:
1960 to 1967 327 ci 60cc chamber and 1.72/1.54 inch valve
Block number is 3782870 Small Block V8 1962-1967 327, 2 bolt
intake is 3844459
Starboard side engine:
Casting number for the heads is: 39322454 for both
Thses have whole for the raw water pump
It says its for a 307 or a 350 1968-69 valves 1.72/1.50 inch cahmber 76 ccc
Block number is 37782870
Intake is 3844459
My question is i wonder if chris craft original casting number on head 39322454 but it says it comes of a 307 hp
or did it come with 3884520 and i just have to find a head with that number that has holes to attache the raw water pump
as you can see from the info below: i have 2 motors 327 hp F series and one does not have holes in the head to attach the raw water pump
So i need to change the head so i cn attach the raw water pump
Port side engine
The casting number on both heads are 3884520
These do not have holes for attaching raw water
That casting number gives me the following info:
1960 to 1967 327 ci 60cc chamber and 1.72/1.54 inch valve
Block number is 3782870 Small Block V8 1962-1967 327, 2 bolt
intake is 3844459
3844459 | 1964 1965 | 327 327 | 300 300 | Cast iron with Carter AFB. Riveted oil splash shield. |
Starboard side engine:
Casting number for the heads is: 39322454 for both
Thses have whole for the raw water pump
It says its for a 307 or a 350 1968-69 valves 1.72/1.50 inch cahmber 76 ccc
Block number is 37782870
Intake is 3844459
3844459 | 1964 1965 | 327 327 | 300 300 | Cast iron with Carter AFB. Riveted oil splash shield. |
My question is i wonder if chris craft original casting number on head 39322454 but it says it comes of a 307 hp
or did it come with 3884520 and i just have to find a head with that number that has holes to attache the raw water pump