I'm new here and could use some help. What should I inspect first when I 'trim out' (not under power) my motor and it make an intermittent scratchy/squeaky sound instead of the normal constant sound of the cylinder trimming my motor out. It's like it lost power to raise the motor. It'll "catch" and then continue to raise motor and that scratchy/squeaky sound goes away. It will trim all the way down like normal. Try to trim it out again and it's like it doesn't have the power to raise the motor. Pardon my lack of wording this issue correctly. I've looked at my manual and it's over my head of understanding what to look for. I don't have a good mechanic background or even a decent understanding of hydraulics, I'll get there with some help and study.Thanks in advance for any help.
Jack Lowe
Jack Lowe