First wanted to say I figured out my primer bulb and float leak situations, thanks to the contributors for the help
i have read from the ones who answer most not to touch or do an thing extra, don’t look more into it....
so my question is, I’ve done the carb rebuild and seems to run fine in test tank, do I need to do a lync and sinc procedure.
both carbs open and close together, anything more?
thanks in advance
i have read from the ones who answer most not to touch or do an thing extra, don’t look more into it....
so my question is, I’ve done the carb rebuild and seems to run fine in test tank, do I need to do a lync and sinc procedure.
both carbs open and close together, anything more?
thanks in advance