Logo
FULL SITE MENU

2009 mfs25b Fuel lines

J

Jimnem

New member
Can’t get accurate information as to what fuel line I need to replace with existing.5/16” Is what I’ve believe is used but need to know What the pressure Is on my system .Ive found a lot and I know it takes A1 rated hose .Im replacing everything from fuel rail back to vapor seperator and so on .Tia
 
Most of the fuel lines are 5mm (3/16"). It's not Type A1, but rather EPA rated low-permeation tubing. You can get the hoses right from your Tohatsu dealer. You do not need oitker clamps, as the pressures are well below 100 psi on all hoses.
 
pvanv said:
Most of the fuel lines are 5mm (3/16"). It's not Type A1, but rather EPA rated low-permeation tubing. You can get the hoses right from your Tohatsu dealer. You do not need oitker clamps, as the pressures are well below 100 psi on all hoses.
Click to expand...
Thanks Paul 👌💯
 
Back
Top