Hi,<br><br>I have a rib. It's only small but goes fast so it's fun.<br><br>Anyway there are two places where I could use some repairt advice.<br><br>1) - The tube is pulling away from the transom - presumably from me sitting on the tube. The Tube has a kind of overmould (rubbery?) that connects the tube to the transome. This overmould sticks well to the tube but is pulling away from the transome. Any ideas on what adhesive to properly fix.<br><br><img src="http://www.marineengine.com/boat-forum/attachment.php?attachmentid=24940&amp;stc=1" attachmentid="24940" alt="" id="vbattach_24940" class="previewthumb"><img src="http://www.marineengine.com/boat-forum/attachment.php?attachmentid=24941&amp;stc=1" attachmentid="24941" alt="" id="vbattach_24941" class="previewthumb"><br><br>2) - There is a rope guide down the port side which has pulled right out of it's housing - see the pic. I don't think I can get it back in to the patch - I was thinking ouf gluing it down - any ideas on that one too?<br><br><img src="http://www.marineengine.com/boat-forum/attachment.php?attachmentid=24942&amp;stc=1" attachmentid="24942" alt="" id="vbattach_24942" class="previewthumb"><img src="http://www.marineengine.com/boat-forum/attachment.php?attachmentid=24943&amp;stc=1" attachmentid="24943" alt="" id="vbattach_24943" class="previewthumb"><br><br>Cheers