Logo
FULL SITE MENU

6Hp carburetor for Tohatsu MFS5C engine.

Unknown. 3R4-03200-0 is correct. If no stampings on the carb, likely a cheap copy, possibly chinese.
 
I agree, the size of the hole is not engraved on the nozzles, I measured the hole of the main jet 60, the slow jet 40. The mixing tube has only 4 mixing holes on one side and 2 mixing holes on the other side. When I enlarge the nozzles to 45 and 70, I'm worried that the main nozzle won't work with the mixing tube (will the mixture be rich?). What solution will you recommend me?
 
The problem remained unresolved, still true: "Remember that every time you need a helping hand, you will find it at the end of your arm." - Audrey Hepburn
 
Back
Top