Thecrazieone
New member
Hi everyone I have a 1989 Sierra with omc cobra 4.3 in it I am having problems to get it started with the key ignition. I have replaced the starter/starter solenoid/ ignition coil with what was recommended at my marina with the flamethrower coil for performance. Now with all of that done I can run a jumper on the solenoid and it fires right up no problem and runs good. I can then go turn the key to the off position and it kills the motor but when I go and try to start it with the key nothing happens can anyone help or am I over my head with a wiring problem.
Thanks for your time and hope I can get this figured out
Thanks for your time and hope I can get this figured out