I have a Johnson 50hp model J50PLEEA. It has no fire from the CDI unit to the coil pack. I have put 2 brand new CDI boxes on and 2 new timer bases still nothing. I have installed a new keyswitch and traced every wire out on the motor. It has a new stator, coil pack, plugs and wires, CDI box, timer base, keyswitch. I have disconnected the black/yellow wire. I have checked over all the wiring and grounding multiple times I am at a loss. The stator has ohms fine on both sides and using a DVA it is putting out 280V and 32V. Has anyone ran into anything like this?