Logo
FULL SITE MENU

2000 Evinrude 225 thrust washer to go with Solas prop

B

baddog1016

Regular Contributor
I have a new Solas Amita 3 prop for my 2000 Evinrude 225 (SSC model) The thrust washer that is currently on the engine has too big a diameter to fit into the hub on the new prop. Are there different diameter thrust washers or are there ever props that don't need thrust washers?
 
Thanks for the quick response. This forum is the best for getting real answers and not just snarky comments.

I imagined I needed a Solas part. I've tried to find a listing for Solas thrust washers without success. I have emailed them and will have to wait until Monday to call them. I managed to find this after I wrote my initial response. The 225 uses an "E" series prop and here's a link to the page: https://www.solas.com/exec/product.php?mod=&cid=98&lg=E
 

Attachments

  • Solas parts.jpg
    Solas parts.jpg
    124.3 KB · Views: 8
Last edited:
Back
Top