L
SX-M 2.18, removed nuts to all 6 mounting bolts, disconnected the shift cable and took off the threaded barrel. The stern drive just wont budge. If the splines are rusted, what is the best way to get penetrating oil on them to see if it will be enough to pull the stern drive...not much room to work with?
SX-M 2.18, removed nuts to all 6 mounting bolts, disconnected the shift cable and took off the threaded barrel. The stern drive just wont budge. If the splines are rusted, what is the best way to get penetrating oil on them to see if it will be enough to pull the stern drive...not much room to work with?