Skipper2019
New member
Hello.
Looking for advice on one of my mains.
Starts cold and idles at 850-900 rpm.
Once warmed up if you rev the throttle then pull back to idle it runs at 1400
If shut off and let cool at will idle properly until throttle up again
Checked and disconnected throttle linkage. No issue with it.
Any suggestions?
Looking for advice on one of my mains.
Starts cold and idles at 850-900 rpm.
Once warmed up if you rev the throttle then pull back to idle it runs at 1400
If shut off and let cool at will idle properly until throttle up again
Checked and disconnected throttle linkage. No issue with it.
Any suggestions?
