Logo

Getting the brushes back in

toadshade

Member
Can anyone tell me a trick to hold the springs back so I can get the stator back in? Mine are the type that sit behind the brush, not outside and beside it. I can do it with the magnet off but if I try to put the magnet back on after the stator is in, it pulls the stator out of place.
 
I ended up getting it in. I am still interested to know if anyone has a pro way of doing it, but I bent clips that held the brush wires from the furthest point of the spring to the outside of the motor case. Dropped the casing and pulled the clip and seated the casing. I used bailing wire for the clip.
 
Back
Top