Logo
Results 1 to 4 of 4
  1. #1

    Default surge break issue

    I have a ranger 17. 5 ft with surge breaks. The locked up the other year. I replaced the line and calipers. Last year they locked up when was getting ready to take out. I cut the break line. Up front. Now I want to replace the front slider part with 2 pins going through. This way the whole systems new and will be free from issues. Question is how to fix it right. I canít post picture .the square inside slides in and has 2 pins
    Last edited by jackd; 03-27-2020 at 02:01 PM.

  2. #2
    Join Date
    Sep 2008
    Location
    Maryland - USA
    Posts
    8,182

    Default Re: surge break issue

    There's a youtube video where one of the bass fishing guys rebuilds his.....may be worth a look....

  3. #3
    Join Date
    Dec 2006
    Location
    Chaumont Bay, N.y., USA
    Posts
    5,959

    Default Re: surge break issue

    Now I want to replace the front slider part with 2 pins going through. This way the whole systems new and will be free from issues. Question is how to fix it right. I can’t post picture .the square inside slides in and has 2 pins
    Ayuh,...... Change the whole coupler/ master-cylinder assembly,.....
    Any Grease is Better,... Than No grease at All....

  4. #4

    Default Re: surge break issue

    2 yrs ago on way home the breaks were smoking and locked up. I replaced the breaks , calipers all the hoses to the point it connects to the hose that runs up front. Well it lasted all year the next year. When I tried to take the boat out the breaks were locked up. I cut the hose up front at the surge part. Looks like the emergency break cable may have got tangled. So now I’m finishing the breaks . It will be new from front to back. I got the front surge part off just need to figure out how to finish the job.online it’s called the inner member slide.
    Last edited by jackd; 04-02-2020 at 05:31 PM.

Similar Threads

  1. Honda 225 surge issue
    By Bty_athletics in forum Honda Outboard Forum
    Replies: 1
    Last Post: 08-07-2019, 09:59 AM
  2. Honda 130 Surge Issue
    By dcfar82 in forum Honda Outboard Forum
    Replies: 7
    Last Post: 05-23-2019, 05:02 PM
  3. Electrical Surge/issue Scenario
    By eneusiis in forum Honda Outboard Forum
    Replies: 18
    Last Post: 03-29-2019, 08:14 AM
  4. Break in
    By macbarber in forum Johnson Evinrude Outboard Archive
    Replies: 2
    Last Post: 06-04-2006, 07:10 AM
  5. Mercury 150xl v6 saltwater serise 2001 low surge and high surge
    By joe toledo in forum Outboard motors archive 2000-2004
    Replies: 1
    Last Post: 07-03-2002, 10:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •