Logo

Yanmar 4JH5E sea water pump question

Emtktr

New member
I’m rebuilding the sea water pump. All drawings are informative however I’m not able to figure out the orientation of the V Ring X02230015. It is part number 12 on the attached image. Any help would be appreciated...thanks868F37C5-0BCC-4946-8047-4C19E830A93B.jpg
 
Last edited:
V-rings are fitted on the spigot and inserted into the L-joint. Before the spigot with V-ring is inserted in the socket, the original KeraMat lubricant must be applied in the vitrified clay pipe socket and on the V-ring. thank you.
 
Back
Top