MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
Thanks guys. What about things in front of the out drive? Any bearings, cables etc that should be replaced?
Robert
Ok thanks. Sounds like there are either one or two of these. I’m the second owner (two years) and there is no history to tell me if they were replaced by the original owner. I Think the original engine was an AQ260A and was replaced with a Kodak Marine 350 in the 1996. Dies any of that tell you if I have one or two bearings? Any other way to tell? Serial# of outdrive is 29007051B.
-Robert
............ How do I find out what gear ratio I have or do most 350’s have the same ratio?
Robert
If you have the red 1 pc Flywheel Cover (bell housing in the auto world) and with a grease fitting at the 12:00 O'clock position........ or, if you have a red Borg Warner flywheel cover with the Borg Warner -slash- Volvo Penta PDS adapter housing, with a grease fitting at the 12:00 O'clock position, you will have a double bearing PDS.
The engine must be removed in order to replace these two bearings/seals.
.