Logo
Click for Honda Manuals, Parts and Model Guides!
Results 1 to 4 of 4
  1. #1

    Default Honda BF30D cilinder 3 does not work

    Hello I have an Honda BF30D with 1 problem that cilinder 3 does not work but the have spark and compression Good carbs are clean help me please.

  2. #2
    Join Date
    Sep 2010
    Location
    Jersey Shore
    Posts
    5,948

    Default Re: Honda BF30D cilinder 3 does not work

    The carbs are the issue. Almost impossible to clean. Cheap to replace.
    Chris
    Dockside Marine Services
    Jersey Shore.
    Mercruiser/Mercury Certified
    Let the insanity begin.

  3. #3
    Join Date
    Sep 2010
    Posts
    19,509

    Default Re: Honda BF30D cilinder 3 does not work

    ?----Inspection is what is done here.---What happens when you spray some fuel into the #3 carburetor ?------Say if an intake or exhaust valve was stuck closed you would have good compression.------But the cylinder would not produce power.----Costs zero $ to have a look I say.

  4. #4
    Join Date
    Jul 2017
    Location
    meteghan, digby co, Nova Scotia Canada
    Posts
    17

    Default Re: Honda BF30D cilinder 3 does not work

    If compression and spark are good, your problem is most likely the carburetor. Take it apart again, and check the 2 brass tubes coming up from the float bowl going to the top . These are likely plugged.

Similar Threads

  1. Honda BF30D Won't Start After Fitting
    By R33 in forum Honda Outboard Forum
    Replies: 3
    Last Post: 04-13-2015, 09:30 PM
  2. 2006 Honda 30 BF30D Ser# BAUJ-1200xx rich idle
    By Glenn Clark in forum Honda Outboard Forum
    Replies: 11
    Last Post: 04-02-2015, 09:47 AM
  3. Yamaha 50 fourstroke one cilinder doesn't work
    By bosmari in forum Yamaha Outboard Forum
    Replies: 8
    Last Post: 07-25-2011, 09:15 AM
  4. Honda BF30D gear case Oil
    By grampsey in forum Honda Outboard Archive
    Replies: 4
    Last Post: 10-30-2008, 08:33 PM
  5. Source Honda BF30D 4 stroke Engine cover
    By Bibleman in forum Honda Outboard Archive
    Replies: 1
    Last Post: 08-31-2008, 09:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •