So I did the boo boo and left the sea cock closed after flushing the engine and the boat went for a small journey. Fortunately no damage was done and even impeller stayed intact although it was replaced.
While the boat was running there was no temperature alarms of anything to alert that there was no water flowing through the system.
On the outlet exhaust from turbo there is a port(see photo). Is there a temperature sensor that should be here or can there be one installed to alert if the cooling is getting hot from lack of water?
Cheers
Keriboi
While the boat was running there was no temperature alarms of anything to alert that there was no water flowing through the system.
On the outlet exhaust from turbo there is a port(see photo). Is there a temperature sensor that should be here or can there be one installed to alert if the cooling is getting hot from lack of water?
Cheers
Keriboi