michael_l
Member
I have a 1983 229CI (3.8L) Crusader V6, fresh water cooled. A while back I replaced original exhaust manifolds and risers with center rise OSCO (I could not find any risers for the original Crusader manifolds). It is time to replace the risers again (9 years in salt water) and OSCO is out of business. I have a second pair of very serviceable OSCO risers but no gasket material for the manifold /riser joint. When I replaced them 9 years ago, it was simply a gasket (no SS block off plate) and it has worked well all this time. My question is what kind of gasket material should I use since there are no OSCO gasket available in the market?Thanks, Mike