Logo
Results 1 to 3 of 3
  1. #1

    Default Necessary parts to replace in the outdrive?

    So I found a mechanic that is going to do some work on my boat. I need the trim sending unit replaced, and I figured since the lower would be removed I would have him service the entire piece. Bellows, gimbal bearing, universal joint, impeller etc... is there anything else relevant to change while the boats apart? I want to handle anything necessary but Iím not very familiar with whatís practical.

  2. #2
    Join Date
    Dec 2006
    Location
    Chaumont Bay, N.y., USA
    Posts
    5,894

    Default Re: Necessary parts to replace in the outdrive?

    Ayuh,..... I guess that depends on what yer workin' on,......

    So,....... Whatcha workin' on,....... Atleast the model, 'n year,.... Serial number might also help,.......
    Any Grease is Better,... Than No grease at All....

  3. #3

    Default Re: Necessary parts to replace in the outdrive?

    As bondo mentioned not sure what your working on but given the age of the drive since omc closed up decades ago, I’d have the drive pressure tested and replace seals if fails. Possibly the drive has been resealed already and won’t work, but at least you’d know

Similar Threads

  1. SP outdrive sheared off cone - can I replace the threaded end?
    By jid in forum Volvo Penta Gas Engine Forum
    Replies: 26
    Last Post: 05-31-2018, 08:41 AM
  2. Can a Merc 140 replace an OMC 140 on a stringer outdrive?
    By ohopluke in forum OMC Sterndrive and Inboard Forum
    Replies: 4
    Last Post: 10-28-2016, 08:34 AM
  3. What can I use to replace these old parts?
    By Beowulf in forum Mercruiser Sterndrive Forum
    Replies: 7
    Last Post: 09-15-2011, 05:47 PM
  4. Replace 318 w360 or biggermatching parts
    By bootyscootn in forum Chrysler Inboard and Sterndrive Forum
    Replies: 12
    Last Post: 11-27-2009, 10:24 PM
  5. How do I replace the bellows on my 4cyl Volvo outdrive
    By wharfcreek in forum Volvo Penta Gas Archive
    Replies: 12
    Last Post: 08-01-2009, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •