WRClifford
Member
Hi everyone. Infrequent poster here. I am reassembling a 1995 Johnson 90 J90SLEOC. I am stumped about the right configuration of the balance and drain tubes. They were not installed when I disassembled the engine, so have no reference for reinstallation. In the diagram at
http://www.marineengine.com/parts/j...urer=Johnson§ion=Cylinder+&+Crankcase
These are parts numbers 8 (upper and lower), and 62.
On the diagram at http://www.marineengine.com/parts/j...nson§ion=Carburetor+&+Intake+Manifold
Part 66 starboard (port side I know) and 60 in to the air silencer.
The manual does not have a clear diagram showing how these connect together. And help here is appreciated!
Thanks!
Wayne
http://www.marineengine.com/parts/j...urer=Johnson§ion=Cylinder+&+Crankcase
These are parts numbers 8 (upper and lower), and 62.
On the diagram at http://www.marineengine.com/parts/j...nson§ion=Carburetor+&+Intake+Manifold
Part 66 starboard (port side I know) and 60 in to the air silencer.
The manual does not have a clear diagram showing how these connect together. And help here is appreciated!
Thanks!
Wayne
Last edited: