I'm getting an older outboard into shape. Mercury 75HP made in '86. The brittle fuel lines I tore out yesterday were marked SAE 30R7.
A website that sells fuel lines has this in the description: "30R7 is not Coast Guard approved for marine applications".
Pep Boys carries a hose from CADNA in the size I need (50086) that says low pressure/high temp but nothing about marine applications.
So what's best to run from the fitting to the fuel pump, then from the pump to the carbs?
A website that sells fuel lines has this in the description: "30R7 is not Coast Guard approved for marine applications".
Pep Boys carries a hose from CADNA in the size I need (50086) that says low pressure/high temp but nothing about marine applications.
So what's best to run from the fitting to the fuel pump, then from the pump to the carbs?