LakeBoaterNC
New member
95 4.3lx gen2....Motor runs fine now. No back firing. I went out for 2 hours mostly at 3000, then made a 30 sec WOT run back to the dock. Ran strong. got home and pulled plugs to check plugs and they were still white. There was some color in the plug on the metal sides. Do I need to run it for more time b4 reading plugs? by the way, when I dumped out the old filter into a glass it looked clean with no debris, but after it settled a couple hrs. i could see a little water in the bottom. THANKS!