Logo

wont start first time

driesdej

New member
I hope someone can help.
I have a Suzuki DT15 2 stroke outboard.
Runs great when running but cannot start it cold or first time without squirting fuel into the cylinders via plugs.
Even with choke on it wont start.
There is fuel in float chamber.
I squirt fuel in and its starts first pull and runs smothly. when warm it starts fine.
Could it be that the timing is just off for a cold start.
Dries
Madagascar
 
That is good to know. I have a similar motor in a remote camp in NW Ontario. These models are sensitive to improper float setting. Centrifugal advance can be a "double edge sword" on 2 strokes and one downside is they can get noisy.
 
Back
Top