Hello all,
So middle of duck season is not a good time for the boat to die. All was working fine went to start it at the end of hunt and nothing. Not even a click. Battery is fully charged. Just put fresh termianals on it as well. Tested for 12v at the starter solenoid and got it. However the smaller low volt wire that controls is seems to not be getting power. With muiltimeter on that terminal on the solenoid when the key is turned nothing. I was able to half track that wire just by size and color back to the solenoid assembly. And that solenoid has 12v going in but the small terminal that the smaller wire is on has nothing. Not sure where to go from here. Thanks in advanced for any help
So middle of duck season is not a good time for the boat to die. All was working fine went to start it at the end of hunt and nothing. Not even a click. Battery is fully charged. Just put fresh termianals on it as well. Tested for 12v at the starter solenoid and got it. However the smaller low volt wire that controls is seems to not be getting power. With muiltimeter on that terminal on the solenoid when the key is turned nothing. I was able to half track that wire just by size and color back to the solenoid assembly. And that solenoid has 12v going in but the small terminal that the smaller wire is on has nothing. Not sure where to go from here. Thanks in advanced for any help