Mickey2019
New member
Hi guys, please help. I took my boat last saturday out wanted to fish ,so I run my motor on muffs night before and in morning before my trip everything was good and working like it should, so I went to my usual boat ramp drop my boat in water started right up checked everything and left to go catch bait ,my voltage was reading 14.2 V while driving there there was no warning light or buzzer alarm everything was smooth, about 10 min ride , I stop turned motor off to go catch bait ,so 30 min after i got back got my bait i tried starting so i can go to my favorite fishing spot but my motor wouldn't start all i hear was loud clicking and buzzing it was coming from main relay under the tilt trim relay, my batteries are good and tested ,i get 12.45 V to the power + post on the motor if the terminal is not connected to starter fuse or motor the moment is connected voltage drops to 7-8V and buzzing starts at main relay ,now my left digital instrument reading error and right side has fades 0 barely visible there is a draw somewhere somewehre on motor I cant find it ,can anyone please tell me if you had anything similar to my problem like out of blue no start just clicking voltage going down,starter doesnt engage nothing works tilt trim nothing.please help.thank you sorry if i made errors ,i am first time here .thanks