Logo

Trim Problem - Please help

mohsindoc

New member
New user to the forum and first time boat owner so please go easy on me.

I have recently purchased a boat with twin 2006 Suzuki DF250 engines. The boat has had little use over the last 12 months. Currently sitting on a trailer being serviced and antifouled.

The trim on the port side engine is shaking on the way down but smooth on the way up. The starboard engine trims smoothly but slower than the port side engine.

I live in Qatar where there is a Suzuki dealer but my confidence in them is poor to say the least.

Any thoughts on what the problem may be and what is required to fix this?

I have attached a photo of the trim and a video of the trim moving can be seen using the link below.

https://youtu.be/VoetaPxeOD4

Thanks in advance

Mohsin
 
For trim shudder trim it fully up and then top up the oil, use 10w30 in an oil can to do this. As for trim speed, could be voltage drop or the trim motor is on its way out.
 
Back
Top