Logo
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2017
    Location
    Michigan
    Posts
    18

    Default Different wot rpm numbers

    Hi all, I wanted to figure out my WOT rpm since I know the prop I'm running seems like it could be over revving motor. I picked up a tachometer that wraps around spark plug wire. So on bottom cylinder I was reading 480-510 rpm at idle and 2890-2910 rpm at WOT. I swapped plug wires and on top cylinder I got 690-720 rpm idle and 5920-5930 rpm WOT. Any idea why the difference between cylinders, coil going bad? My manual says 4500 rpm for EOT which I thought sounded low for a 2 stroke? I have a 82 Johnson 35hp J35ELCND. I'm looking for more hole shot and stern lift so I'm trying to figure out my starting point as to how the motor is running now before I jump into changing anything. Any input would be appreciated thanks.

  2. #2
    Join Date
    Dec 2012
    Location
    newport news, va
    Posts
    229

    Default Re: Different wot rpm numbers

    those inductive tachs settings are a problem, for lawn movers to v8's, play with settings, hope your testing on the water, high rpms on a hose is dangerous. 5000 to 5500 is common for most if 5920 turns out to be correct your getting a good hole shot.

Similar Threads

  1. Where's the Numbers?
    By thudpucker in forum Johnson Evinrude Outboard Forum
    Replies: 3
    Last Post: 03-17-2013, 04:12 PM
  2. Strange Model Numbers and Serial numbers on pcm motor cant find year or hp
    By castin318 in forum Pleasurecraft Marine PCM Forum
    Replies: 0
    Last Post: 03-21-2010, 05:07 PM
  3. Not sure of the Ser numbers
    By wintys in forum Mercury Mariner Outboard Archive
    Replies: 3
    Last Post: 01-19-2009, 06:50 PM
  4. WOT numbers for a 89 57
    By bfoulk in forum Mercruiser Sterndrive Archive
    Replies: 8
    Last Post: 10-26-2007, 07:00 PM
  5. IO VIN NUMBERS
    By Frank Abbott in forum Mercruiser Sterndrive Archive
    Replies: 4
    Last Post: 10-29-2006, 08:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •