Andrew33764
New member
Hey guys
ive got twin 454 efi tbi fwc engines
I had throttle position sensor issues. Fixed it
im using rinda diacom software. I set the timing to 8 degrees in base timing mode
in run mode I see the advance go to 40 at high rpm but I’ve been told by someone at marine power no more than 32
so what’s the deal. Any help?
ive got twin 454 efi tbi fwc engines
I had throttle position sensor issues. Fixed it
im using rinda diacom software. I set the timing to 8 degrees in base timing mode
in run mode I see the advance go to 40 at high rpm but I’ve been told by someone at marine power no more than 32
so what’s the deal. Any help?