Logo
Click for Suzuki Manuals, Parts and Model Guides!
Results 1 to 2 of 2

Thread: Df200 codes

  1. #1

    Default Df200 codes

    Customer brought in 05, df200 onboard diagnostic code was 4-2 ckp sensor (crankshaft) replaced ckp sensor, cranked engine it ran for 2 minutes then shutdown. Then onboard diagnostic gives 3-2 map sensor (beeps and lights) had to reflash computer with candoo pro. Candoo program shows active code for ocv on starboard. Why would my program laptop show ocv and not map sensor, is map small passage blocked in head.?
    I know this motor is not a good one , what I've been told if it ever gets water in oil it's in the trash can ?

  2. #2

    Default Re: Df200 codes

    Come to find out df200-df225 don't use ocv only df250-df300. The Suzuki manual doesn't. Say this , you have to go to engine harness diagram to find.

Similar Threads

  1. '08 DF200 Cooling Problem
    By Robert Pastor in forum Suzuki Outboard Forum
    Replies: 0
    Last Post: 07-01-2019, 11:38 AM
  2. Shop manual for 2019 DF200?
    By BF225 in forum Suzuki Outboard Forum
    Replies: 0
    Last Post: 05-09-2019, 01:23 PM
  3. What Engine & Gear oil for 2006 Suzuki DF200
    By jserr68594 in forum Suzuki Outboard Forum
    Replies: 1
    Last Post: 03-03-2017, 12:29 AM
  4. 2006 df200 won't rev
    By Jperez0823 in forum Suzuki Outboard Forum
    Replies: 1
    Last Post: 11-24-2013, 11:42 PM
  5. DF200 stalling on cold start up
    By cmoffatt in forum Suzuki Outboard Forum
    Replies: 0
    Last Post: 08-16-2012, 04:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •