Logo

165 hp inline 6 cylinder

Mikey N.C.

Advanced Contributor
Customer brought in boat ( wiredt) made in California,1972 , with. Inline 6,
Outdrive was pulled , don't know if it's a R or RM drive , shift cable brass nut is on the in side . not to aft. It had old crimped support tube, we can order new inner outter cable. Never seen one. Cables are behind engine above steering shaft.
 
R & MR 1983 -1990

I, II, III are your choices.

The only way to tell is by serial number and verticle neddle/roller just above
Pinion gear in lower. R, MR, Alpha all have 18 neddles.
I, II, III should have larger needles, 13, I believe.
 
Kg, I'm not going into out drive other than impeller and checking u-joints and oil. I'll look for serial numbers. Motor from California has been winterized with oil on top of pistons.
 
Back
Top