hello got a new boat (to me) 97 searay 210.. cleaned the hull..took lots of pressure and star brite hull cleaner...when done noticed fiberglass showing through in some areas down by the keel...what to do...scanned videos for help..not too much out there.. maybe paint the bottom or gel coat it...but how...sitting on trailer in garage...mayb paint the very lower area jus to the bunk boards???? n what products work best?? any links to diy vids
Thanks KB NewB w Sea Ray
and another question...buffed the top blue ring around the boat..its about 10 inches wide...not a decal...has hard water stains n some scratches...hit it w the turtle stuff "fine" didnt touch the hard water stains..but its shiny n bright blue question, why is my buffer pad blue? Thick wool type.. is the blue from paint? do i need to step up the grit to get the hard water droplet stains out...theres a second lower 2 inch blue ring around the boat thats a decal...mayb the blue on the buffer pad came from that?? is the top blue ring (not a decal) blue gelcoat ?? Thanks again if any out there knows this stuff
Thanks KB NewB w Sea Ray
and another question...buffed the top blue ring around the boat..its about 10 inches wide...not a decal...has hard water stains n some scratches...hit it w the turtle stuff "fine" didnt touch the hard water stains..but its shiny n bright blue question, why is my buffer pad blue? Thick wool type.. is the blue from paint? do i need to step up the grit to get the hard water droplet stains out...theres a second lower 2 inch blue ring around the boat thats a decal...mayb the blue on the buffer pad came from that?? is the top blue ring (not a decal) blue gelcoat ?? Thanks again if any out there knows this stuff
Last edited: