Logo

Honda Cylinder heads Interchangable

MinusOne

New member
Long story short got the call from the machine shop today stating when he was testing the head found a small hole on the exhaust side of the cylinder head. Cylinder is DONE short block still good motor is an 06-07 BF 150 BANJ-130020. Question is can i use a K24 A8 Honda CRV head. Not mush information online as to if this has been tried before. The difference would be nearly 1K. Besides the epoxy paint used on the marine version not seeing a difference. I can use my old valves and springs which may be a littler stiffer due to the sustained higher RPM use. Please any help would be appreciated. Or if i just need to bite the bullet and buy the marine version.
 
If they look the same then try, would be very interested to know. When you say 1K difference, do you mean for new or used?
 
Back
Top