Logo
FULL SITE MENU

2000 DF70 warning buzzer wiring?

F

First Draft

New member
I disconnected the warning buzzer recently while doing some work on my center console. It has two wires coming from it - a grey wire with a male plug type connector and a blue wire with a female plug type connector. Can anyone tell me where those two wires plug in to?
 
Follow the grey wire from the tacho meter it should have a 10amp fuse inline the gray wire from buzzer should join up with the ignition switch then go through the 10amp fuse onto the tacho meter. the blue wire from buzzer should go with a blue&white striped wire.
 
Tegweni said:
Follow the grey wire from the tacho meter it should have a 10amp fuse inline the gray wire from buzzer should join up with the ignition switch then go through the 10amp fuse onto the tacho meter. the blue wire from buzzer should go with a blue&white striped wire.
Click to expand...
Thanks for the info. My gray wire does not have an inline fuse, to either the buzzer or the tacho meter. But I connected them all together and it works now.
 
Back
Top