Logo

Minn Kota Maxxum Pro 65lb_ Need help identifiying problem and how to fix

stillbill4801

New member
I am submitting a picture of the problem location on my trolling motor. I am a newbie to trolling motor repair so I was hoping someone on here could look at this and tell me exactly what the problem is, what needs to be fixed, and at least some idea of how to go about fixing it. Thanks in advance for any help!

Bill
 

Attachments

  • IMG_2021_Fotor.jpg
    IMG_2021_Fotor.jpg
    32.2 KB · Views: 49
If the picture is the bottom of the fixed tube, I'd guess the bearing retainer at the top loosened up and the motor assembly has 'dropped' a little bit....the upper bearing could have failed as well......

Best bet is to get out your manual and look at the exploded view and then take it apart and figure out if an adjustment will resolve the slop or new parts are required....
 
Back
Top