MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
Update removed shaft it had no front circlip one rear clip no rear seal there is only one recess forward and aft for circlip the bearing that was in it is sealed 91193 is this correct bearing
Thanks Rick I got some younger eyes on the bearing it is a skf 6206 seaied and still good but will replace the pds looks to have had work done on it some pitting on corse splines will post some pictures. Will have to get some snap rings only rear one installed.The boat was purchased from the bush and the previous owner was very agriculture. Cheers