Logo

DT75 1995, corrosion on mating surfaces on head and block.

driver2008

New member
[h=2]DT75, 1995, corrosion on block.[/h][COLOR=#6A6A6A !important]03-13-2019, 10:25 AM

[/COLOR]

Apart from TIG Al welding, anyone know of a semi hardening/metal filler paste which will withstand the temperature, water and pressure
fetch
on how to deal with the corroded pits on the top face of the block, below the head gasket?
These pits were directly below the long channel on the underside of the cylinder head, which was totally blocked with salt. The head is Kaput as a little piece is missing between the long channel and the galleries surrounding the combustion chamber.
fetch
fetch

 
Back
Top