Logo

Steering on 75 Chrysler Bass with Force Outboard

Chrysler1

New member
I am new to this forum and I recently purchased a 1975 Chrysler Bass Pro 16 with an 85 Force Outboard. The steering is Gerry-rigged with a bolt. It works; but I need info or a photo of what or how the steering cable connects to the outboard.

I have not been able to upload a file; but basically there is a 3/8" bolt inserted in the support plate hole allowing the steering cable to be attached. However, there must be another part that is inserted in this hole.

I would appreciate any info - especially a picture.

Thanks
 
Ayuh,..... The end of the cable should be mounted in the tilt tube, with a link back to the tiller arm,.....
 
Back
Top